Why Does My Chair Keep Going Down

By | Last Updated on January 11, 2022

Enduring long hours can be taxing in and of itself. You may lose efficiency as the day goes on, hence why things like a cup of coffee and a comfortable chair grow especially crucial. However, when it comes to essential office equipment, many people grumble that their office chair continues lowering, contributing to your declining productivity.

Regrettably, even the most modern office chairs will not stay upright after several weeks of use, but the great news is there are a couple of simple fixes available. The point is, don’t toss your falling office chair; in this post, we’ll show you how to mend a chair keep going down. So please stick with us.

Causes of Chairs Keep Going Down: 

A hanging chair does not imply that the entire chair is defective. There is a straightforward explanation for why this occurs. The lift on the office chair cylinder has failed. The component of an office chair that links the foundation to the seat is known as the cylinder. And it is what means allowing us to adjust the chair up and down. Nitrogen gas is contained within the chair cylinder. 

Here are some more technical details about gas springs. When you actually pull the chair lever, the nitrogen gas inside the cylinder switches chambers, allowing the cylinder to move up and down. The chair is being pushed down by the cylinder. The seal in the cylinder begins to wear out and leak with time and with frequent use of your chair.

One point is certain just because a chair is falling apart doesn’t indicate it is worn out. It signifies that the chair’s raising mechanism has failed, suggesting that it must be repaired.

Do you want to know how to fix a chair that keeps going down? We’ve outlined everything for you here.

Top 4 Quick Methods to Fix a Chair Keep Going Down: 

Follow the ways to improve your problem.

1. Use a Hose Clamp & Duct Tape:

Using a hose clamp and some duct tape is a classic DIY short-term fix or workaround. This technique will not restore your office chair, but will keep it from sinking. The hose attachment must be size 20 or 13/16″-1-3/4″ in diameter for this approach to operate.

The hose clamp functions as a stop by putting around the cylinder piston at a particular height. Duct tape is used to keep the clamp from moving around. This, however, could only operate for several days before slipping. So your chair will be falling once more before you realize it. This is also not a very respectable appearance in your house or at work.

2. Use a Plastic Spacer:

To keep the cylinder from dropping, another DIY office chair hack uses a plastic spacer or a piece of PVC. The plastic spacer can be wound all around the cylinder piston if sliced down the middle. If you’re using an uncut spacer or PVC, you’ll have to do some more work (taking apart the cylinder to slide on the spacer).

This spacer, like the hose clamp, only acts as a stopper and does not allow for adjustability. Another big downside is that owing to the effort of reclining in your chair, the plastic is prone to breaking or fracture. This method might not be appropriate for usage in a professional context.

3. Replace the Cylinder:

The hose clip and spacer options, as already said, are just transitory, only allow you to recline at one height, and don’t seem really respectable. This is particularly true if you have invested a significant amount of money in a high-end office chair, such as a massage chair for the office. As a consequence, we recommend that the cylinder be replaced.

Changing the chair cylinder is relatively more straightforward than you may think, and it will keep your office chair looking and feeling new for another 6+ years. Many of the swivel chair pieces (chair cylinder, base, caster wheels) are simply replaced because most desk chairs are manufactured the same way. A chair cylinder of industry-standard size will fit 95% of office chairs.

4. Pneumatic Systems:

In heavy machinery, pneumatics – and hydraulics – are utilized. Compressed air is used in pneumatic systems to provide movement. An air compressor provides the compressed air that the machinery needs continuously.

Hydraulics, on the other hand, uses an oil-based method. The compressor operates by pulling air into a high-pressure tank and storing it (a receiver). This compressed air is then delivered to the machinery via pipelines and valves, providing power and movement. As a result, a pneumatic system is lighter, cleaner, and less expensive.

Office chairs are pretty ingenious! Instead of using heavy manual methods to change your chair’s sitting configurations, current office chairs have a pneumatic component that enables them to be readily adjusted. A single-acting cylinder is used in a pneumatic office chair. This is a spring that has been pumped full of oxygen. The air within the chamber increases as the piston moves further outside the chamber, enabling the seat to drop. If your chair continues to sink, this indicates that the cylinder has failed.

FAQ’s ( Frequently Asked Questions) 

Let us now turn our attention to a frequently posed question.

Why does my chair keep going down?

A single-acting cylinder is used in a pneumatic office chair. This is a spring that has been pumped full of oxygen. The air inside the chamber expands as the piston moves further out of the chamber, allowing the seat to lower. If your chair continues to sink, this indicates that the cylinder has failed.

Why does my adjustable chair keep going down?

A piston regulates the opening that your seat height lever controls, allowing air in and out. If your chair continues to sink, it signifies the valve, also known as a chair cylinder, is broken. You’ll either have to repair the piston or buy a new chair to correct it.

How do you stop a swivel chair from going down?

Pull the chair’s plastic skirt up or down to uncover the metal cylinder. Snap the PVC pipe around the cylinder by pressing the sliced side against the cylinder. It should now keep the chair in position and prevent it from slipping down.


Our office chairs are expensive, and we want these to be comfortable and productive for our long days at work. And the chair appears to stop operating after only a few years (or less) of use. It lowers, and the office chair won’t stay up, even though it looks virtually brand new and in good condition. 

Why Does My Chair Keep Going down? This is a common question among many people. For the money you’re spending, you should get a solid product. The chair’s continual decline could be due to various factors, including the chair’s construction quality. Also, the cylinders of chairs should be checked thoroughly to ensure that they do not cause any unfavorable meetings or other issues.

No one should have to live with an office chair that constantly falls, whether they spent $100 or $1,500 on it. We’ve been trying to work while locked in the lowest heat of an office chair that didn’t stay up, and it’s not nice.

Leave a Comment